-.extract zip file into drive C:\.
-.install MTK Driver inside TWRP3 folder, choose your OS. (not needed if you already installed before).
-.enable USB Debugging on your phone.
-.make sure you enabled Fastboot Mode on your phone (Developer Option menu).
-.reboot your phone into Fastboot Mode (hold vol-down + power, and then release power).
-.connect your phone to computer using USB.
-.make sure your phone detected on Device Manager.
-.open command prompt, and then point to C:\TWRP3\.
-.type “fastboot flash recovery TWRP3.img” (without “) and press enter.
-.wait until it prompted “OK”.
-.!!! before doing the next step, make sure your finger ready to press vol-up button.
-.type “fastboot reboot” and press enter, and then imediately press and hold vol-up button until MI Logo displayed, and then release vol-up button.
-.DONE, good luck.
-.this TWRP included SuperSU, you will prompted to install it if you don’t have SuperSU when you leave TWRP.
Hits: 1890
Leave a Reply